scroll down

Enterprise Dynamics

Industry trends

COB LED CHIP series

Date：

2026-01-06

COB LED CHIP series

Info.Recommendation

2024.05.31

How Does a 5mm straw hat LED Work?

Our 5mm straw hat LED have the LED die in the center in a frame. This whole setup is covered with a 5mm epoxy lens/case. There are then bi-pin legs that come off the bottom of the LED and hang below the epoxy package. The longer of the two leads is the positive side (Anode) and the shorter of the leads is the negative side (cathode). There is also a flat spot at the bottom of the lens where the negative leg is, which is another way to configure the positive and negative sides.

图片名称

MORE

图片名称

2024.05.31

Six typical packaging structures

At present, there are more than 100 types of LED packaging structures, including more than 40 types of LAMP series, more than 30 types of SMD series, and more than 30 types of COB series. High power packaging, optical integration packaging, and modular packaging are among the main packaging types. The timely development of packaging closely follows the development needs of customer application products

图片名称

MORE

图片名称

2024.05.31

2835 Low Current LED Beads for Visual Light Sources

The 2835 low current LED beads dedicated to visual light sources are a specially designed LED bead designed to provide high-quality visual light sources. Here are some basic information about this LED bead:

图片名称

MORE

图片名称

2024.05.31

Welding Method of LED Beads

There are various welding methods for SMD LED lamp beads, and the following is one of the commonly used methods for reference. First, use an electric soldering iron to heat some soldering tin on the positive and negative electrode pads of the lamp bead (the soldering tin must not be too much, otherwise, the positive and negative electrode pads will be connected once heated with a Heat gun), then use a Heat gun to heat the positive and negative electrode pads at the same time, after the tin is melted, use tweezers to place the positive and negative electrodes of the lamp bead on the corresponding pads. The operation should be fast and accurate, otherwise, the Heat gun will melt the LED plastic packaging and damage it.

图片名称

MORE

图片名称

2024.05.31

A reliable 5mm round head direct insertion LED manufacturer in Guangdong

5mm round head straight insertion LED lamp beads are a high brightness lighting product, compact in size, energy-saving and environmentally friendly, widely used in household indicator lights. However, it is not easy to find a reliable manufacturer of round head straight in LED lamp beads in the market. Fortunately, our company is a professional manufacturer of round head straight LED lamp beads with 20 years of experience and advanced technology.

图片名称

MORE

图片名称

2024.05.31

3mmled lamp beads_ 3mm round head straight insertion LED lamp beads_ Application characteristics

In terms of appearance, 3mm straight in LED lamp beads can be divided into: 1. 3mm round head straight in LED lamp beads. 3mm round head straight in LED lamp beads are divided

图片名称

MORE

图片名称

< 1...59 60 61...76 >

Shenzhen Highlight Electronics Co., Ltd.

Sales Hotline

Fax：86-0755-27480569

Main telephone: 86-0755-27471835 (20 lines)

Address: 6th Floor, Building E, Huachuangda Industrial Park, Gushu Hangcheng Avenue, Xixiang, Baoan District, Shenzhen, Guangdong.

Product Message

WeChat consulting

©2022 Shenzhen Highlight Electronics Co., Ltd.

Designed： www.300.cn longgang | SEO

粤ICP备12061608号