scroll down

Enterprise Dynamics

Industry trends

COB LED CHIP series

Date：

2026-01-06

COB LED CHIP series

Info.Recommendation

2024.06.20

The importance of three-color LED in stage effect lights

The importance of three-color LEDs in stage effect lights In order to create a good stage lighting effect, three-color light Emitting diodes are an indispensable lamp bead in lamp equipment, and the application opportunities of LED lamp beads in various light fields can be seen everywhere. So today, let's talk about the importance of three-color LED in stage effect lighting performances.

图片名称

MORE

图片名称

2024.06.19

5mm LED - Green 525nm 15 Degree Viewing Angle

he 525nm Green 5mm LED (T-1 3⁄4 through-hole) boasts an impressive brightness of 37,700mcd. Its typical forward voltage is 3.20Vdc and driving current is 20mA with a maximum forward current of 30mA. The lens is transparent, measuring 5mm in di

图片名称

MORE

图片名称

2024.06.18

5mm LED - Yellow 590nm 30 Degree Viewing Angle

The 5mm yellow LED you're referring to has the following specifications:

图片名称

MORE

图片名称

2024.06.10

2835 SMD LEDs Application Scenarios

2835 SMD LED is a LED lamp bead with a package size of 2.8mm x 3.5mm, which is widely used in the field of lighting. Due to its compact size and high brightness, 2835 SMD LED is widely used in various occasions such as indoor lighting, commercial lighting, landscape lighting, etc. In indoor lighting, 2835 SMD LED can be used in lighting equipment such as chandeliers, ceiling lamps, downlights, etc., to provide users with a bright and energy-saving lighting environment. In commercial lighting, 2835 SMD LED is often used in shopping malls, supermarkets, office buildings and other places to increase indoor brightness while reducing energy consumption, with obvious economic benefits.

图片名称

MORE

图片名称

2024.06.08

There are two primary ways of producing white light-emitting diodes

There are two primary ways of producing white light-emitting diodes. One is to use individual LEDs that emit three primary colors—red, green and blue—and then mix all the colors to form white light. The other is to use a phosphor material to convert monochromatic light from a blue or UV LED to broad-spectrum white light, similar to a fluorescent lamp. The yellow phosphor is cerium-doped YAG crystals suspended in the package or coated on the LED. This YAG phosphor causes white LEDs to appear yellow when off, and the space between the crystals allow some blue light to pass through in LEDs with partial phosphor conversion. Alternatively, white LEDs may use other phosphors like manganese(IV)-doped potassiu

图片名称

MORE

图片名称

2024.06.06

light-emitting diode structure

Parts of a conventional LED. The flat bottom surfaces of the anvil and post embedded inside the epoxy act as anchors, to prevent the conductors from being forcefully pulled out via mechanical strain or vibration.

图片名称

MORE

图片名称

< 1...58 59 60...76 >

Shenzhen Highlight Electronics Co., Ltd.

Sales Hotline

Fax：86-0755-27480569

Main telephone: 86-0755-27471835 (20 lines)

Address: 6th Floor, Building E, Huachuangda Industrial Park, Gushu Hangcheng Avenue, Xixiang, Baoan District, Shenzhen, Guangdong.

Product Message

WeChat consulting

©2022 Shenzhen Highlight Electronics Co., Ltd.

Designed： www.300.cn longgang | SEO

粤ICP备12061608号