scroll down

Discuss the issue of light color consistency of indicator light emitting diodes

Date:

2025-01-07


Today I want to share with you how to solve the problem of light color consistency of Cob  and LED s when using LED indicator  . Yes, you heard it right, this method is really very effective, and it is simple and easy. So, what is this method? Next, let's reveal the answer together! Near the end of the year, there are more and more people consulting lamp beads about light color consistency and matching solutions. Why are LED diode  prone to light color inconsistency? Because LED diode are often used with very small current. The demand is high brightness, low current, and low power consumption, so that the light color consistency of various applications with low power consumption is better, and it requires simple use, long life, and good durability. The same is true for our multi-color lamp beads. So although the voltage is different in many cases, in order to better use it on the same PCB board, when designing, we will consider choosing lamp beads with similar color voltages. There is a problem here. If it is a new product design, we can directly match the specifications of lamp beads with similar voltages. However, for many processing enterprise projects, the color of the end customer is dynamically adjusted. Some products may have 3 lamps, and some products may have 4 LED lamps. We know that the voltages of red, yellow-green, yellow, orange, blue, emerald green, purple and white LED  diode are often different. Therefore, if different colored lamp beads are used on a board without separate current limiting resistors, a single lamp bead will grab the voltage or the voltage will be too high, resulting in a dead light. This is one reason. Second, different LED lamp beads have different voltages. For example, the voltages of red and orange lights are generally only 2 volts, while the voltages of blue and white lights are generally 3 volts. That is, LED diode with different voltages are used on a small lamp board. On the one hand, the board space is limited, and on the other hand, cost is a factor. If the lamp bead voltage matching is not considered at this time, it is easy to cause inconsistent light colors of the lamp beads, or even dead lights. Dead lights are really a very serious matter, and the severity is no less than light decay. The most feared thing about dead lights is overcurrent, overvoltage and high heat generation. Dead lights caused by overvoltage and overcurrent burn chips, and high heat generation easily causes the colloid to turn yellow, resulting in light decay and shortened life. Professor Lamp Beads saw a chat between a customer friend and his assistant last week. The customer was looking for a plug-in 3mm 0.06W indicator light and asked: "Are there any products with similar voltages for different colors?" The customer wanted to use it as a charging indicator light. The actual current only needed to be 1 mA, but the customer did not want to adjust the indicator light current limiting resistor. He asked to change to a different color LED light without changing the drive current, and he had requirements for brightness. He required that the brightness should not be dim at a low current of 1 mA, and that the brightness of the LED indicator light should not be much different after the replacement (human eye vision). The assistant thought that the customer just wanted to match a fewLED diodes with similar voltages, and also white light.

led diode

Info.Recommendation

2024.10.28

With the continuous advancement of science and technology, the electronics industry is also undergoing earth-shaking changes. In this transformation, 234LED packaging technology is gradually becoming the focus of the industry with its unique advantages and innovative performance. This article will explore in depth the development history, technical characteristics, application fields and future trends of 234LED packaging technology. 234LED packaging refers to LED lamp beads with a size of 2mm*3mm*4mm. Its appearance is square. This type of lamp bead is widely used in lighting, indicator lights, electronic display backlight sources and other fields. The following is a detailed introduction to 234LED lamp beads 34 square lamp monochrome series, transparent colloid parameters (can also be made into mist colloid) 234 square lamp specifications include 234 white light, 234 red light, 234 orange light, 234 yellow light, 234 yellow-green light, 234 emerald green light and 234 blue light. And 234 red and green dual colors, 234 red and blue dual colors, 234 blue and green dual colors. 234 square lamps also have their own characteristics, that is, the light-emitting surface is square light, which has its own advantages. For example, with the square PCB board design, the light output effect is better. For example. On mechanical keyboards, in addition to many models using 3mm straight plug round head lamp beads and 0603 patch lamp beads. Many electronic engineers choose 234 square lamps as the indicator light source of the keyboard. These ultra-bright 234 different color lights form a dazzling light color. Share LED lamp bead industry information every day, and easily select lamp beads. Lamp Bead Professor: Buy lamp beads, find Hailongxing, improve selection efficiency, and reduce maintenance costs. Hailongxing Optoelectronics: 20 years of focus on the research and development, production and sales of light-emitting diodes (LED lamp beads). You can make an appointment with engineers to provide lamp bead quick selection services, free sample testing, and effectively solve your selection problems!

图片名称
< 1...777879...100 >
Shenzhen Highlight Electronics Co., Ltd.

Sales Hotline

Address: 6th Floor, Building E, Huachuangda Industrial Park, Gushu Hangcheng Avenue, Xixiang, Baoan District, Shenzhen, Guangdong.

Product  Message

QR

WeChat consulting


©2022 Shenzhen Highlight Electronics Co., Ltd. 

Designed: www.300.cn   longgang  |  SEO