What is the intermittent transmission LED light strip and how is it achieved?
Breakpoint continuous transmission LED light strip is one of the RGB slide light strips, with rich light effects and pure and colorful light colors.
The breakpoint continuous transmission LED light strip adopts a dual signal line cross transmission scheme. After one signal is interrupted, the other backup signal line can bypass the fault point and transmit the signal to the next pixel. Thus, it can be achieved that on a light strip, when one light bead is not lit, the other light beads can emit light normally. It will not affect the overall effect.
The models of breakpoint continuous transmission slide light strips are relatively diverse, and the products have extremely high stability and are compatible with SPI slide controller.
The breakpoint continuous transmission light comes with various waterproof light strips, which can be used indoors and outdoors with good flexibility. In addition, the minimum shear ruler is 100mm, which is flexible in cutting and has a luminous angle of up to 120 °. It has excellent temperature resistance and a service life of 30000 hours.
The use range of breakpoint continuous transmission light strip is very wide, including hotels, KTVs, shopping malls, parks
There are many welding methods for LED lamp beads on the chip, and the following is one of the commonly used methods for reference. First, use an electric soldering iron to heat some soldering tin on the positive and negative electrode pads of the lamp bead (the soldering tin must not be too much, otherwise, the positive and negative electrode pads will be connected once heated with a hot-air gun), then use a hot-air gun to heat the positive and negative electrode pads at the same time, after the tin melts, use tweezers to place the positive and negative electrodes of the lamp bead on the corresponding pad.
LED is the light emitting diode, which is a semiconductor solid light emitting device that converts electric energy into light energy. Its core is the PN junction. In addition to the forward conduction, reverse cut-off and breakdown characteristics of the general PN junction, it also has the light emitting characteristics under certain conditions. Its structure mainly includes the following parts: lead, bracket, encapsulation glue, bonding wire, LED chip, solid crystal glue and phosphor. The discoloration failure of LED lamp bead is closely related to its material, structure, packaging process and service conditions. The following will analyze the causes of its discoloration through specific cases.
LED lamp beads are also called light emitting diodes. It has a wide range of applications. Its luminous colors include red light, emerald green light, yellow green light, yellow light, purple light, blue light, white light and orange light. The above is monochromatic light. It can also be made into two or three colors.
The gold wire used to package LED lamp beads contains more than 99.99% gold. It is produced by drawing gold from this material. In addition to 99.99% gold, this gold also contains less than 1% other trace elements. One of the core components of LED lamp bead packaging is gold wire, which is the bridge connecting the luminous chip and the welding point, and plays a decisive role in the service life of LED lamp bead. So how to identify the purity of gold thread?