News-Shenzhen Highlight Electronics Co., Ltd.

NEW

Shenzhen Highlight Electronics Co., Ltd.

MORE +

scroll down

FAQ

Enterprise Dynamics

Industry trends

2026.03.29

Shenzhen 5050 Monochrome SMD LED Chips

5050 RGBW LED lamp beads represent an advanced LED technology. Specifically, the 5050 monochromatic LED beads produced in Shenzhen refer to SMD (Surface Mount Device) beads with dimensions of 5 × 5.5 × 1.6mm. These lamp beads boast diverse characteristics and enjoy wide-ranging applications, capable of emitting stable monochromatic light.

2026.03.28

1.5W RGBW CLED: Five-Color Integration Lamp Beads

5050 RGBWC LED chips represent an advanced LED technology. Specifically, the 5050 monochromatic LED chipsproduced in Shenzhen refer to SMD (Surface Mount Device) beads with dimensions of 5 × 5.5 × 1.6mm. These lamp beads boast diverse characteristics and enjoy wide-ranging applications, capable of emitting stable monochromatic light.

2026.03.24

How to Identify Positive and Negative Poles of 5050 RGB LED

2026.02.27

The Wavelength Range of Visible Light and Its Optical Characteristics

Visible light constitutes the narrow band of electromagnetic radiation detectable by the human visual system. Despite its limited spectral extent relative to the full electromagnetic spectrum, it is fundamental to illumination, visual perception, optical metrology, and modern solid-state lighting technologies. In engineering contexts, wavelength functions not merely as a descriptor of color but as a quantitative parameter governing photon energy, luminous efficacy, light–matter interaction, and overall system performance.

2026.01.06

COB LED CHIP series

BI -color COB LED CHIP series

2025.12.11

Traffic signal led diode specifications and dimensions

Traffic lights (red and green lights) are a crucial component of urban traffic management, and their core light source is high-brightness, high-reliability LED chips. Different colors of traffic lights (red, yellow, and green) have different requirements for LEDs, making the selection of the right model essential.

2025.11.19

３４０W multi-color COB chip

5454series 400W five color COB.620nm/460nm/520nm/2700K /6500K. IF W:300mA RGB:2A&34-38V.Whole size 54*54mm. 100-110LM/W,CRI 95+ and emit size 43mm.Design for photography and stage light

2025.11.24

High Power 5454 RGBCW Five Color

Ce RoHS Certified High-Power 340 Chip 620nm/460nm/520nm Emitting Colors White Warm White Red Green Blue36-38V

2025.11.17

LED SMD LED specifications and parameters

LED SMD LED chips are categorized by core specifications based on package size. Key parameters revolve around photoelectric performance and application scenarios, clearly outlined below

2025.11.13

Distinguish the positive and negative poles of light-emitting diodes

LED packaging segment products, using Sanan chip packaging, power 1W0.2w 1.5W, luminous angle 120°, luminous color RGB white light, red light, green light, blue light two-color, three-color, 3528RGB SMD LED features: moisture-proof, anti-sulfurization, anti-dead light, good heat dissipation, low light decay,

2025.11.07

Introduction to high power COB led chip

High-power COB (Chip-on-Board) LED chips are integrated light sources that mount multiple LED dies directly on a single substrate, offering high brightness, uniform light distribution, and compact design.

2025.10.27

How to choose COB chip

COB chip are widely used in a wide range of fields, offering high brightness, high efficiency, and a large luminous area. This requires careful consideration.

2025.09.30

SMD LEDs on Arduino Explained

When you look at an Arduino board, you will notice a few SMDs (surface-mount-devices). Like other components, LEDs can also be surface mounted. The RX and TX LEDs on Arduino are, as you might have guessed, examples of SMD LEDs. These types of LEDs don’t require any wiring and are soldered directly onto a circuit board.

2025.09.26

Introduction to RGB LEDs

RGB is short for red, blue, and green. RGB LED is essentially LEDs in those colors put together. Combining those colors, RGB LED can produce almost any color, but it struggles with shades of pink and brown. With legs for each of the three colors, an RGB LED will have a fourth leg, for anode or cathode. When looking at an RGB LED, you should face it so the second leg from the left is the longest. They should then be in the following order: red, anode or cathode, green, and blue.

2025.09.23

Bi-color and Tri-color LEDs Explanation

Bi-color and tri-color LEDs are components that light up in different colors depending on the direction or configuration of the electrical current.

< 1 2 3 4 5 >

Shenzhen Highlight Electronics Co., Ltd.

Sales Hotline

86-18899859121

Fax：86-0755-27480569

Main telephone: 86-0755-27471835 (20 lines)

Address: 6th Floor, Building E, Huachuangda Industrial Park, Gushu Hangcheng Avenue, Xixiang, Baoan District, Shenzhen, Guangdong.

Product Message

WeChat consulting

Designed： www.300.cn longgang | SEO

More

More

More

More

More

More

More

More

More

More

More

More

More

More

More